Industrial Coatings

Normal epoxypaint cannot protectacid fumes andacid drops formore than threeto six month, this High polymercoating have provenrecord for longdurability . Acid Fume resistant high polymer coatings are the derivative of high solid polymers conjunction with Amine Adducts, Poly amide, etc. They provide air drying, Chemical Resistant, acid resistant coating.

AMEETUFF INSULATION COATING F-73 A&B are the polymer of epoxies resin conjunctions with poly amide and poly amine along with insulation compound , They provide air drying, anti-corrosive , Chemical resistant and anti-bacterial layer along with insulation properties to the coated surface.

AMEETUFF puroacryl Epoxy anti-carbonationcoatings are the derivative of Epoxy conjunctions withanti-carbonation resins , They provide air drying, Fire resistant ,Chemical resistant and anti-bacterial coating on the tunnel and concreate surface along with its elasto sealing properties , it can create washable layer to the surface , it also gives long lasting waterproofing property on walls and concreate surfaces , even on variabletemperature applications, abrasion resistance, and corrosion protection are maintained.

Epoxy floor coating Base coat are the derivative of Epoxite conjuction with Amine/ amide Adducts,. They create high degreeof bonding with concrete surface for anti-carbonation alongwith di electric insulation to floor ,itgives air drying, Chemical Resistant finish.

Anti-magnetic coatings are the derivative of specially designed polymer along with patented compounds with Adducts, etc. They provide air drying, / heat dryingantimagnetic, Chemical Resistant Finish along with anti-Corrosive properties to surface.

EMFs are measured in milli Gauss (mg). The Environmental Protection Agency recommends that you limit your exposure to 0.5 mg to 2.5 mg. When you are three feet away from a microwave, and mobile tower radiation, you are exposed to up to 25 mg. EMI AND EMF Blocking coat are the water and solvent based paints, they are used for shielding interior as well as exterior surfaces from microwave radiation, mobile tower radiation, and radio waves. , along with mobile tower radiation, Attenuation: 38-40 dB per layer—approx. 98-99%.

LB-130 sealantis a stuffing compound based on elastomeric polymer and the compoundhas 69% solids with rubberized flex able material ,also contains mica and silicon binder and fire retardantco polymer , that make compound nondrying and flexible even in extreme summer and winter conditions and is highlyrust preventive and nonflammable when solvent vaporize. It has excellent sealing properties and vapor barrier for protection of cold duty insulation.

Fire Retardant light reflective fluorescent, anti-carbonation silicon epoxy paint, colour dye or pigmented are vital to ensure the safety and fire resistance of all type of surfaces. Especially for high visibility requirements in tunnels, road blind bends, hill roads, coal mines etc., it’s also essential to meet Indian and British safety standard BS 476, when it comes to fire regulations for different type of concrete or steel structures. Fire rated paint can be the difference between people surviving of fire or not being able to evacuate in time and also for safety of important durable goods, as it gives a time delay between a fire starting and spreading.

ALB 9—is water based weather barrier, breather type mastic coating for thermal insulations. ALB-9 dries to a tough flexible film that protects thermal insulation from the effect of weather by preventing water, rain, snow, spillage, wash water, etc., from entering into the system. It also protects from physical abrasion and expansion/contraction, and contributes chemical- and fire-resistance.

All structures, Duct, steel etc immersed in a marine environment or STP OR ETP are subject to acid alkali fumes and the deposition of several organisms such as barnacles, mussels, algae and others. Marine fouling is the result of the growth of these plants and microorganisms on the surface, other relevant factors are the risk of localized corrosion due to the metabolic activity of the attached organisms and the obstruction of turbines in hydroelectric plants. Currently, the use of Chlorosulphonated FRP paints is the most economical and satisfactory method to protect submerged structures.

AMEETUFF Coil grade puro acryl coating are the derivative of acrylic conjunctions with poly epoxy resins, they provide air drying, anti-corrosive, Chemical resistant and anti-bacterial layer along with washable layer Properties to the coated surface.

It provide excellent conduction propertyalong with coating on plastic, poly carbonatesheets ,Steel , mild steel, Aluminium, wood , PVCEtc. Along with its conductiveproperties it isvery useful inelectrical and electronicequipment’s , computer , laptop, hospitals equipment’s , nuclearplants , sensitive electronic and electrical instruments,because of high conductiveproperties ,etc , It forms a durableair drying , film over the surface. The product possess good flexibility addision and water & Chemical resistance.

Di electric coatings are the derivative of Epoxite and acrylics conjuction with Amine/ amide Adducts, Poly amide, Polyamines’ etc. They provide air drying, / heat drying electrical insulation to surface along with Chemical Resistant & anti-Corrosive properties.

AMEETUFF Thatch F.R is a water-based fire retardant spray which not only prevents fire from spreading through thatch roofs but also seals the thatch making it resistant, for birds and monkeys to damage, resistant to fungus and rot and can also protect against the suns UV rays. The water-insoluble phosphate used in Thatch Marshall imparts flame-retarding properties, limits run-off with rainwater and prolongs the fire retardant properties of the treated thatch.

Fire Retardant ceramic duct coating are vital to ensure the safety and fire resistance of all type of duct surfaces, it’s also essential to meet Indian and British safety standards, when it comes to fire regulations for domestic and commercial buildings. Fire Retardant Duct coating contains selected mineral fillers in a low permeability elastomeric binder to a nominal thickness of 700-800 microns to give a finished product, Fire rated paint can be the difference between people surviving a fire or not being able to evacuate in time, as it gives a time delay between a fire starting and spreading.

Anti-corrosive epoxy clears are the derivative of Epoxies conjunctions with Amine Adducts, Poly amide, Polyamines etc. They Provide air drying /, oven dry , salt waterResistant Finish along withanti-Corrosive properties , it also give anti-fungal properties.

Epoxy fusion bonded coating are the derivative of Epoxite conjunction with Amine/its Adducts, Polyamines ’etc. They provide air drying, / heat drying Chemical Resistant Finish and anti-Corrosive Coating to surface.

Fire Retardant ceramic duct coating are vital to ensure the safety and fire resistance of all type of duct surfaces, it’s also essential to meet Indian and British safety standards, when it comes to fire regulations for domestic and commercial buildings. Fire Retardant Duct coating contains selected mineral fillers in a low permeability elastomeric binder to a nominal thickness of 700-800 microns to give a finished product, Fire rated paint can be the difference between people surviving a fire or not being able to evacuate in time, as it gives a time delay between a fire starting and spreading.

Fire paint, clear or pigmented are vital to ensure the safety and fire resistance of Bamboo or Structure. It’s also essential to meet Indian and British safety standard BS 476, when it comes to fire regulations for domestic and commercial buildings. Roof tops etc, Fire rated paint /clear can be the difference between people surviving a fire or not being able to evacuate in time, as it gives a time delay between a fire starting and spreading.

Protect your valuables with AMEETUFF Paper Guard fire retardant spray: used for corrugated boxes paper faced insulation, arts & crafts, lamp shades, card board (file boxes, panels, inserts), drywall (unfinished), paper blinds, any paper product that is unfinished or can absorb, AMEETUFF Paper Guard can treat it. Used by Schools, Day Care Centres, Arts & Craft Shows, Production Studios, Painters, Art Studios, Banquet Events, Exhibits, Museums and much more. AMEETUFF Paper Guard is transparent, odourless, non-toxic, non-hazardous and environmentally safe. AMEETUFF Paper Guard - for paper, cardboard, crafts, paper faced insulation and flame residence.

Fire retardant puro acryl Silicon paint, clear or pigmented are vital to ensure the safety and fire resistance of all type of surfaces. It’s also essential to meet Indian and British safety standard BS 476 part 6 , part 7 , UL 94 , BS EN ISO 11925-2 ,RDSO MNC /PCN/120-2011/REVISION 1 ANEXURE A &also tested for two to four hrs. at Govt.of India Lab , along with state govt. lab, when it comes to fire regulations for domestic and commercial buildings and different type of durable goods. Fire rated paint can be the difference between people surviving of  fire or not being able to evacuate in time and also for safety of important durable goods, as it gives a time delay between a fire.

Fire retardant light reflective fluorescent, anti-carbonation silicon epoxy paint, Colour dye or pigmented are vital to ensure the safety and fire resistance of all type of surfaces. especially for high visibility requirements in tunnels , road blind bends , hill roads , coal mines etc ,It’s also essential to meet Indian andBritish safety standard BS 476 , when it comes to fire regulations for different type of concrete or steel structures .Fire rated paint can be the difference between people surviving of fire or not being able to evacuate in time and also for safety of important durable goods , as it gives a time delay between a fire starting and spreading.